Registration required for file download

Return

Cibin’s refrigerating equipment is classed as food and agricultural machinery (MACHINES DIRECTIVE 2006/42/EC), destined for the treatment
of food products.
The machine is designed for the conservation of foods and/or “fresh” products at temperatures indicated in annexes.
It has been designed to work in ambient temperatures from +16°C to +43°C (class T).
It has been designed to maintain a set temperature in a refrigerated cold room suitable for such uses.
The machine is not designed for use in cold rooms situated outside.
The machine is not designed for installation and use in an environment where there is risk of explosion.
Any use other than that permitted shall be considered improper, and in this case the Manufacturer will decline all liability.
The machine is not designed for the conservation of products, which produce corrosive substances.

European regulation 517/2014 establishes the rules relating to the marketing of equipment and products containing HFCs. Monoblock refrigeration units fall under point 12 and can use refrigerant gases with GWP lower than 2500.
CIBIN produces monoblock ranges that use a variety of refrigerants, including R449A, R290 and R455A. Given the increasingly stringent regulations and technological availability, CIBIN specifically wished to support and develop expansion of the monoblock range using R455A refrigerant.
We therefore recommend using R455A and/or R290 monoblocks where possible.
The refrigerant charge means that R455A machines have an environmental impact in terms of CO2e less than 90%.

• Sealed circuit
• Hermetic compressor
• Electronic fans
• Anti-vibration compressor brackets
• Air condensation
• Galvanized powder coated sheet steel body
• Evaporator body of aluminium-magnesium alloy
• Evaporator of copper pipes and aluminium fins
• Condenser of copper pipes and aluminium fins
• Automatic restarting low pressure switch (to be welded)
• Automatic restarting high pressure switch
• Compressor timer management to avoid too near start-ups
• Axial fan
• Condensation control device *
• Thermic compressor protection
• General magnete-thermal protection
• Thermostatic expansion valve with external equalization *
• Suction pressure relief valve (only for low temperature models)
• Dehydrator filter
• Suction-side liquid separator *
• Defrost hot gas solenoid valve
• Automatic hot gas defrosting
• Condensation outlet siphon
• Condensation outlet resistor (only for low temperature models)
• Cold room ceiling light and power source cable with related protection
via fuse
• Ambient temperature probe
• Defrosting end temperature probe
• Condensation control temperature probe*
• Connecting cable for door resistor with protection 4A fuse
(only for low temperatures models) and related protection with fuses
• Connecting cable for door micro switch to turn off the system and to turn
on the light at door opening
• Transformer
• Digital display with temperature indicator at one decimal
• On/Off switch
• Cold room light switch
• Running state display: cold – defrosting – evaporator fans – alarm status
• Programming keys
• Alarm display
• Manual defrosting key
• Acoustic alarm
• High temperature alarm
• Low temperature alarm
• High temperature alarm dirty condenser
• Low temperature alarm condenser
• Open door alarm
• High pressure alarm
• Defrosting end alarm because of time-out
• Alarm ambient temperature probe defect
• Alarm defrosting end temperature probe defect
• Alarm condensation control temperature probe defect
• Timer emergency running in case of these events:
– Ambient temperature probe defect
– Defrosting end temperature probe defect
– Condensation control temperature probe defect
– Cold room door open (if there is door micro switch)
• Pre-set connection for Frigotel® supervision

• Door micro switch
• Voltage display for machine stop in case of incorrect power supply
• Acoustic siren with flashing to indicate the alarm state
• Electronic module for the connection to Frigotel® supervision system

* depending on model

LAIKA R744A  N Water Condensation 50Hz

Model Power supply Capacity
Watt		 Volume
m³		 Technical Sheet
(Register for download)
LAIKA 26130 N – SW 400/3/50 2399 26,4
Download
LAIKA 39225 N-SW 400/3/50 3298 38,6
Download
LAIKA 60325 N-SW 400/3/50 4323 59,7
Download

CAPACITY
Te=-10°C;Tcond=+30°C

VOLUME (volume calculation conditions)
Cell Temperature = 0 °C
Ambient Temperature = 32°C

LAIKA R744A  B Water Condensation 50Hz

Model Power supply Capacity
Watt		 Volume A
m³		 Technical Sheet
(Register for download)
LAIKA 26130 B – SW 400/3/50 1705 26,1
Download
LAIKA 35225 B-SW 400/3/50 2192 34,4
Download

CAPACITY
Te=-30°C;Tcond=+30°C

VOLUME (volume calculation conditions)
Cell Temperature = 0 °C
Ambient Temperature = 32°C