The new Cibin monoblock range use the latest generation ultra-low GWP refrigerants. With a GWP of only 146, R455A is the definitive solution for future low medium temperature commercial and industrial refrigeration.
After multiple tests and studies based on the entire cold chain, it has been shown that the TEWI (Total equivalent warming impact) of machines operating with R455A is significantly lower thanks both to the refrigerant, COP and the ease of managing the machines, which are more user-friendly compared to old R404A machines.

Safety

The refrigerant used is composed of a mildly flammable azeotropic mixture (A2L in accordance with ISO 817). However, the use of R455A is made safe (in compliance with the principal safety standards) due to the specific flammability properties of the refrigerant, which include:
a) Relatively high lower flammability limit equal to 11,8% (LFL);
b) Relatively low upper flammability limit compared to the low flammability limit 12,9% (UFL);
c) Minimum ignition energy more than 1000 times higher than propane;
d) Flame propagation speed lower than 1,5cm/s.

Standard configuration

Sealed circuit
• Hermetic compressor
• Electronic fans
• Anti-vibration compressor brackets
• Air condensation
• Galvanized powder coated sheet steel body
• Evaporator body of aluminium-magnesium alloy
• Evaporator of copper pipes and aluminium fins
• Condenser of copper pipes and aluminium fins
• Automatic restarting low pressure switch (to be welded)
• Automatic restarting high pressure switch
• Compressor timer management to avoid too near start-ups
• Axial fan
• Condensation control device *
• Thermic compressor protection
• General magnete-thermal protection
• Thermostatic expansion valve with external equalization *
• Suction pressure relief valve (only for low temperature models)
• Dehydrator filter
• Suction-side liquid separator *
• Defrost hot gas solenoid valve
• Automatic hot gas defrosting
• Condensation outlet siphon
• Condensation outlet resistor (only for low temperature models)
• Cold room ceiling light and power source cable with related protection
via fuse
• Ambient temperature probe
• Defrosting end temperature probe
• Condensation control temperature probe*
• Connecting cable for door resistor with protection 4A fuse
(only for low temperatures models) and related protection with fuses
• Connecting cable for door micro switch to turn off the system and to turn
on the light at door opening
• Transformer
• Digital display with temperature indicator at one decimal
• On/Off switch
• Cold room light switch
• Running state display: cold – defrosting – evaporator fans – alarm status
• Programming keys
• Alarm display
• Manual defrosting key
• Acoustic alarm
• High temperature alarm
• Low temperature alarm
• High temperature alarm dirty condenser
• Low temperature alarm condenser
• Open door alarm
• High pressure alarm
• Defrosting end alarm because of time-out
• Alarm ambient temperature probe defect
• Alarm defrosting end temperature probe defect
• Alarm condensation control temperature probe defect
• Timer emergency running in case of these events:
– Ambient temperature probe defect
– Defrosting end temperature probe defect
– Condensation control temperature probe defect
– Cold room door open (if there is door micro switch)
• Pre-set connection for Frigotel® supervision

Optional:

• Micro porta
• Condensazione ad acqua con ricevitore di liquido, valvola regolatrice pressostatica, attacchi da ½”
•Tensione alimentazione speciali
• Versione tropicalizzata
• Regolatore di velocità ventole condensatore
• Monitor di tensione per fermata macchina in caso di alimentazione non corretta
• Modulo elettronico per il collegamento al sistema di supervisione Frigotel®
• Evaporatore con verniciatura in cataforesi
• Condensatore con verniciatura in cataforesi

* dipende dal modello

Destined use, intended and unintended uses

ssssssssssssssssssssssssss
Cibin’s refrigerating equipment is classed as food and agricultural machinery (MACHINES DIRECTIVE 2006/42/EC), destined for the treatment
of food products.
The machine is designed for the conservation of foods and/or “fresh” products at temperatures indicated in annexes.
It has been designed to work in ambient temperatures from +16°C to +43°C (class T).
It has been designed to maintain a set temperature in a refrigerated cold room suitable for such uses.
The machine is not designed for use in cold rooms situated outside.
The machine is not designed for installation and use in an environment where there is risk of explosion.
Any use other than that permitted shall be considered improper, and in this case the Manufacturer will decline all liability.
The machine is not designed for the conservation of products, which produce corrosive substances.

LAIKA R455A N 50Hz

Model	Power supply	Capacity Watt	Volume A m³	Volume B m³	Technical Sheet (Register for download)
LAIKA 04123 N	230/1+N/50	816	5,0	4,5	Download
LAIKA 06125 N	230/1+N/50	1137	9,0	7,5	Download
LAIKA 07125 N	230/1+N/50	1323	12,0	10,0	Download
LAIKA 09125 N	230/1+N/50	1562	13,0	11,0	Download
LAIKA 18130 N	230/1+N/50	1701	18,0	14,5	Download
LAIKA 21130 N	230/1+N/50	2089	20,0	16,0	Download
LAIKA 24225 N	230/1+N/50	2635	26,5	21,0	Download
LAIKA 37325 N	230/1/50	3663	39,5	31,5	Download
LAIKA 37325N	400/3/50	3716	41,0	32,5	Download
LAIKA 42325 N	230/1/50	3962	44,0	35,0	Download
LAIKA 42325 N	400/3//50	3625	42,5	34,0	Download

CAPACITY
Te= -10°C ; Tcond= + 40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
Cell Temperature = 0 °C
Ambient Temperature = 32°C

LAIKA R455A B 50Hz

Model	Power supply	Capacity Watt	Volume A m³	Volume B m³	Technical Sheet (Register for download)
LAIKA 06125 B	230/1+N/50	761	6,0	–	Download
LAIKA 08125 B	230/1+N/50	1298	9,0	–	Download
LAIKA 17130 B	230/1/50	1442	16,5	–	Download
LAIKA 17130 B	400/3/50	1458	16,5	–	Download
LAIKA 23225 B	230/1/50	2151	24,0	–	Download
LAIKA 23225 B	400/3/50	2101	23,0	–	Download
LAIKA 32325 B	400/3/50	2203	34,5	–	Download

CAPACITY
Te=-30°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
Cell Temperature= -20 °C
Ambient Temperature= 32°C

LAIKA R455A N 60Hz

Model	Power supply	Capacity Watt	Volume A m³	Volume B m³	Technical Sheet (Register for download)
LAIKA 04123 N	230/1/60	742	4,2	4,7	Download
LAIKA 06125 N	230/1/60	1098	7,2	8,3	Download
LAIKA 07125 N	230/1/60	1412	10,0	11,7	Download
LAIKA 09125 N	230/1/60	1730	11,3	13,2	Download
LAIKA 18130 N	230/1/60	2103	16,3	19,3	Download
LAIKA 21130 N	230/1/60	2407	17,5	20,8	Download
LAIKA 24225 N	230/1/60	3011	23,0	27,5	Download
LAIKA 37325 N	400/3/60	3682	31,2	37,5	Download
LAIKA 42325 N	400/3/60	4102	35,5	42,9	Download

CAPACITY
Te=-10°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
Cell Temperature = 0 °C
Ambient Temperature = 32°C

LAIKA R455A B 60Hz

Model	Power supply	Capacity Watt	Volume A m³	Volume B m³	Technical Sheet (Register for download)
LAIKA 06125 B	230/1/60	863	6,5	–	Download
LAIKA 08125 B	230/1/60	1209	8,5	–	Download
LAIKA 17130 B	400/3/60	1689	17,3	–	Download
LAIKA 23225 B	400/3/60	2520	25,7	–	Download
LAIKA 32325 B	400/3/60	2568	36,1	–	Download

CAPACITY
Te=-30°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
Cell Temperature = -20 °C
Ambient Temperature = 32°C

LAIKA R455A N Water Condensation 50Hz

Model	Power supply	Capacity Watt	Volume A m³	Volume B m³	Technical Sheet (Register for download)
LAIKA 04123 N-W	230/1+N/50	816	6,0	5,0	Download
LAIKA 06125 N-W	230/1+N/50	1137	10,0	8,5	Download
LAIKA 07125 N-W	230/1+N/50	1323	13,0	11,0	Download
LAIKA 09125 N-W	230/1+N/50	1562	15,0	12,0	Download
LAIKA 18130 N-W	230/1+N/50	1701	20,0	16,5	Download
LAIKA 21130 N-W	230/1+N/50	2089	23,5	19,0	Download
LAIKA 24225 N-W	230/1+N/50	2635	29,5	23,5	Download
LAIKA 37325 N-W	230/1/50	3663	44,0	35,0	Download
LAIKA 37325 N-W	400/3/50	3716	44,0	35,0	Download
LAIKA 42325 N-W	230/1/50	3716	49,0	39,0	Download
LAIKA 42325 N-W	400/3/50	3625	46,5	36,5	Download

CAPACITY
Te=-10°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
Cell Temperature = 0 °C
Ambient Temperature = 32°C

LAIKA R455A B Water Condensation 50Hz

Model	Power supply	Capacity Watt	Volume A m³	Volume B m³	Technical Sheet (Registrati per il download)
LAIKA 06125 B-W	230/1+N/50	761	7,0	–	Download
LAIKA 08125 B-W	230/1+N/50	1298	10,0	–	Download
LAIKA 17130 B-W	230/1+N/50	1442	19,5	–	Download
LAIKA 17130 B-W	400/3/50	1458	19,5	–	Download
LAIKA 23225 B-W	230/1+N/50	2151	27,0	–	Download
LAIKA 23225 B-W	400/3/50	2203	26,5	–	Download
LAIKA 32325 B-W	400/3/50	2203	37,5	–	Download

CAPACITY
Te=-30°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
Cell Temperature = -20 °C
Ambient Temperature = 32°C

Ultra-low GWP refrigerants

Safety

Standard configuration

Optional:

Destined use, intended and unintended uses

LAIKA R455A N 50Hz

LAIKA R455A B 50Hz

LAIKA R455A N 60Hz

LAIKA R455A B 60Hz

LAIKA R455A N Water Condensation 50Hz

LAIKA R455A B Water Condensation 50Hz

Company

Products

Clients Area

Contacts