Registration required for file download

Return

The new Cibin monoblock range uses natural refrigerants with very low GWP. With a GWP of only 3, R290 is the future solution for low and medium temperature small-scale commercial refrigeration. Our tests have also shown a significant advantage in terms of TEWI, which depends both on the GWP and on all the design solutions adopted.

R290 is classified A3, meaning it is non-toxic but highly flammable. Depending on the application and available volume, it is possible to calculate a maximum refrigerant charge which makes the machine safe from any accidents related to fluid flammability. There are application limits for refrigerant charge of 150g as 150g is never sufficient to create a potentially dangerous atmosphere. Cibin R290 monoblocks are all charged with 150g (or less) in the refrigeration circuit.

• Carica gas ≤ 150 g a circuito
• Circuito sigillato
• Compressore ermetico
• Ventilatori elettronici
• Antivibranti supporto compressore
• Condensazione ad aria
• Carrozzeria in lamiera zincata con verniciatura a polveri
• Carrozzeria parte evaporante in alluminio al magnesio
• Batterie evaporatore in tubi di rame e alette in alluminio
• Batterie condensatore in tubi di rame e alette in alluminio
• Pressostato di alta pressione a riarmo automatico a saldare
• Gestione compressore temporizzata per evitare partenze ravvicinate
• Ventilatore assiale
• Dispositivo controllo condensazione*
• Protezione termica compressore
• Protezione magnetotermica generale *
• Espansione con valvola termostatica con equalizzazione esterna*
• Valvola limitatrice pressione di aspirazione (solo per modelli a bassa temperatura)
• Filtro deidratatore
• Separatore di liquido in aspirazione*
• Elettrovalvola gas caldo sbrinamento
• Sbrinamento automatico a gas caldo
• Sifone scarico condensa
• Resistenza scarico condensa (solo per modelli a bassa temperatura)
• Plafoniera illuminazione cella più cavo alimentazione luci con relativa protezione mediante fusibile
• Sonda temperatura ambiente
• Sonda fine sbrinamento
• Sonda controllo condensazione
• Cavo alimentazione per resistenza porta per modelli a bassa temperatura più relativa protezione con fusibile
• Cavo per collegamento micro porta per spegnerel’impianto ed accendere la luce all’apertura della porta
• Trasformatore di isolamento per alimentazione elettronica di controllo
• Display digitale con indicazione temperatura ad un decimale
• Tasto on/off
• Tasto accensione luce cella
• Visualizzazione dello stato di funzionamento:freddo – sbrinamento – ventilatori evaporatore – allarme in corso
• Tasti di programmazione
• Visualizzazione allarmi
• Tasto per esecuzione sbrinamento manuale
• Allarme sonoro
• Allarme di alta temperatura
• Allarme di bassa temperatura
• Allarme di alta temperatura condensatore sporco
• Allarme di bassa temperatura condensatore
• Allarme porta aperta
• Allarme alta pressione
• Allarme per fine sbrinamento in un tempo superiore al tempo massimo
• Allarme segnalazione sonda temperatura guasta
• Allarme segnalazione sonda di fine sbrinamento guasta
• Allarme sonda controllo condensazione guasta
• Funzione di emergenza temporizzato in caso dei seguenti eventi:
– rottura sonda temperatura ambiente
– rottura sonda temperatura fine sbrinamento
– rottura sonda controllo condensazione
– porta della cella lasciata aperta (se presente microporta)
• Predisposizione per il collegamento al supervisore Frigotel®

* dipende dal modello

• Door micro switch
• Voltage display for machine stop in case of incorrect power supply
• Acoustic siren with flashing to indicate the alarm state
• Electronic module for the connection to Frigotel® supervision system

Cibin monoblocks are designed, manufactured and distributed in accordance with the reference standards and regulations in force.
Specifically, the whole range complies with the following (where relevant):
a) Maximum charge limit of 150g for commercial appliances;
b) Design of the refrigeration system in accordance with EN378;
c) The PED directive with maximum classification 1;
d) The F-GAS regulation;
e) The EN 60204-1 standard on the electrical equipment of machines
f) The Machinery directive (2006/42/EC);
g) EC Regulation 765/2008;

Cibin’s refrigerating equipment is classed as food and agricultural machinery (MACHINES DIRECTIVE 2006/42/EC), destined for the treatment
of food products.
The machine is designed for the conservation of foods and/or “fresh” products at temperatures indicated in annexes.
It has been designed to work in ambient temperatures from +16°C to +43°C (class T).
It has been designed to maintain a set temperature in a refrigerated cold room suitable for such uses.
The machine is not designed for use in cold rooms situated outside.
The machine is not designed for installation and use in an environment where there is risk of explosion.
Any use other than that permitted shall be considered improper, and in this case the Manufacturer will decline all liability.
The machine is not designed for the conservation of products, which produce corrosive substances.

LAIKA R290 WaterLoop N 50Hz

Model Power supply Capacity
Watt		 Volume A m³ Volume B m³ Technical Sheet
(Register for download)
Laika 05123 N-W 230/1/50 832 6,4 4,8
Download
Laika 08125 N-W 230/1/50 975 8,7 6,6
Download
Laika 12125 N-W 230/1/50 1506 8,7 6,6
Download
Laika 14125 N-W 230/1/50 1664 8,7 6,6
Download
Laika 38225 N-W 230/1/50 3036 46,7 35,8
Download
Laika 67325 N-W 230/1/50 4554 82,3 63,8
Download

CAPACITY
Te=-10°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
H2O Temperature= 23 °C
Cell Temperature= 0 °C
Ambient Temperature= 32°C

LAIKA R290 WaterLoop B 50Hz

Model Power supply Capacity
Watt		 Volume A
m³		 Volume B
m³		 Technical Sheet
(Register for download)
Laika 05123 B-W 230/1/50 758 200 5,3
Download
Laika 08125 B-W 230/1/50 947 277 9,3
Download
Laika 11125 B-W 230/1/50 1079 326 12,2
Download
Laika 29225 B-W 230/1/50 2159 653 32,7
Download
Laika 50325 B-W 230/1/50 3238 979 57,3
Download

CAPACITY
Te=-30°C;Tcond=+40°C

VOLUME
Vol. A = Cell insulation: All surfaces
Vol. B = Cell insulation: All walls except floor (volume calculation conditions)
H2O Temperature= 23 °C
Cell Temperature= -20 °C
Ambient Temperature= 32°C